From ced16abab3bc3ec07a20200f6ab924f00c04a975 Mon Sep 17 00:00:00 2001 From: Tom Willemsen Date: Tue, 24 Mar 2026 16:59:45 +0000 Subject: [PATCH] Clarify connection method for LSI Correlator Updated instructions for connecting to the LSI Correlator, specifying the need to use IP address instead of name. --- doc/specific_iocs/other/LSi-Correlator.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/doc/specific_iocs/other/LSi-Correlator.md b/doc/specific_iocs/other/LSi-Correlator.md index c1ae2d3cc..048132026 100644 --- a/doc/specific_iocs/other/LSi-Correlator.md +++ b/doc/specific_iocs/other/LSi-Correlator.md @@ -11,7 +11,7 @@ The software struggles to find the correlator's IP address on our network. Inste In this file, change the default setting of the correlator's IP address to the actual device IP then reboot the software. -The correlator name on the network is `LSI-Correlator-01cb39c4` - prefer connecting by name over IP address, as the device has historically changed MAC address for unknown reasons. +The correlator name on the network is `LSI-Correlator-01cb39c4` - but you will need to connect by IP address, not by name (connecting by name does not work). So use `nslookup LSI-Correlator-01cb39c4` and put the returned IP into the IBEX configuration `ADDR` macro. The address is not reserved as the device has historically changed MAC address for unknown reasons. :::{important} The device is _very_ fiddly in terms of connection.